diode
/ thyristor module
Powerex is a joint venture of General Electric und Mitsubishi. The factory in located in Youngwood (PA) continues also the production of Westinghouse diode and thyristor types.
How to order: Powerex distinguishes between POW-R-BLOK™
and POW-R-BRIK™ modules.
These type descriptions where established, when isolated base plates
where introduced to the market (meanwhile standard).
POW-R-BRIK is the name of the biggest available module, with Compression
Bonded Encapsulation (CBE) and internal
double sided cooling of the silicon wafer. Please
refer here for an product overview and company presentation (pdf,
1.7 MB).
|
POW-R-BRIK™ |
The smaller
modules with any combination of diodes- and / or thyristors are called POW-R-BLOK
™.
Diode module
single diode
type
Circuit:
|
|
Ic
(A)
|
||||||
| Type | Housing | 80 | 100 |
160
|
600
|
2000
|
2500
|
|
| CS41 |
|
800-1800 |
Also
lower current types are available for all shown modules
|
|||||
| CS61 |
|
800-2200 | ||||||
| LS41 |
|
800-2400 |
LS410860 |
|||||
| PS41 |
|
800-4000 | ||||||
please note, that the datasheet link covers all voltage classes of the product groups shown
Dual diode type
Circuit:
** 
|
|
Ic
(A) |
|||||||||
| Type | housing | 30 | 100 | 160 | 250 | 320 | 350 | 600 | 1000 | >1000 | |
| CD41
/ CN41 / CC41 |
 |
800-1800 | Also
lower current types are available for all shown modules CD410830 CD411260 |
CD410899C
* CD41_99D |
|||||||
| CD61
/ CN61 / CC61 |
 |
800-2200 | CD610816B
CD61_16C
CD611016B CD611216B CD611416B CD611616B CD611816B CD612016B CD612216B CD613616C |
||||||||
| ND41/ NN41/ NC41 |
 |
600-2400 | |||||||||
| LD41/ LN41/ LC41 |
 |
600-2400 | |||||||||
| PD41/ PN41/ PC41 |
 |
1800-4000 | |||||||||
| P1Z POW-R-BRIK |
 |
600-3000 |
P1Z8ABR800W P1Z9AAR900W |
P1Z9ACR900W P1Z9ADR900W |
|||||||
please note, that the data sheet link covers all voltage classes of the product groups shown
** switching / connection diagram of the dual diode modules:
 |
 |
 |
| CD
/ ND / LD / PD =(standard) |
CN / NN / LN / PN | CC / NC / LC / PC |
Thyristor diode modules
Circuit: |
|
Ic
(A) |
|||||||||
| Type | housing | <50 | 50-60 | 90 | 160 | 210 | 250 | 500 | 700 | >700 | |
| CD42
/ CD47 |
|
800-1800 | CD420860B
CD470860B CD421260B CD471260B CD421460B CD471460B CD421660B CD471660B CD421860B CD471860B |
||||||||
| CD62
/ CD67 |
|
800-1800 |
Also
lower current types are available for all shown modules |
CD620815B
CD670815B CD621215B CD671215B CD621415B CD671415B CD621615B CD671615B CD621815B CD671815B |
|||||||
| ND42
/ ND47 |
|
600-2000 | |||||||||
| LD42
/ LD47 |
|
600-2200 | |||||||||
|
PD42
/ |
|
600-2400 | |||||||||
| P2Z
/ P7Z POW-R-BRIK |
|
1200-3000 |
P2Z7ABB700W (395A, 1200-1600V) |
P2Z9AAA900W P2Z9ABA900W |
P2Z9ACA900W (590A, 1200-1600V) |
P2ZAABAA00W (880A, 1200-2200V) |
|||||
datasheets on this page are pdf files (english). You will need the Adobe Acrobat
Reader to open them.
Thyristor modules
single thyristor module type
|
Circuit:
 |
|
Ic
(A)
|
||||
| Type | housing |
<400
|
430
|
500
|
1500
|
|
| LS43 |
 |
600-2200
|
||||
| PS43 |
 |
800-1800
|
||||
double thyristor module types
Circuit:
|
|
Ic
(A) |
|||||||||
| Type | housing | <50 | 50-60 | 90 | 160 | 210 | 250 / 330 | 500 | 700 | >700 | |
| CD43
|
|
800-1800 | CD430860B CD431260B CD431460B CD431660B CD431860B |
||||||||
| CD63 | |
800-1800 | |||||||||
| ND43 | |
600-2000 | |||||||||
| LD43 | |
600-2200 | |||||||||
|
PD43 |
|
600-2400 | |||||||||
| P3Z
POW-R-BRIK |
|
1200-3000 |
P3Z8AAT800W P3Z7ABT700W P3Z9AAT900W |
P3Z7ACT700W P3Z8ABT800W P3Z8ACT800W |
P3Z9ABT900W P3Z9ACT900W |
P3ZAABTA00W (880A, 1200-2200V) |
|||||
The datasheet links above cover all voltage classes of every product family
Special-/custom modules
Powerex
manufactures customized modules in own clean rooms. The housings are covered
either by own developed types or by the whole spectrum of Mitsubishi power
electronics. The chips inside Powerex may buy at all manufacturers they want,
Powerex is not being tied to their contract partner Mitsubishi. Available
contact techniques: soldering, bonding and press fit (CBE). Custom specified
modules may be used for the following requirements:
- enhanced temperature range ( -55 bis 200 °C)
- better moisture level / hermetic module housings
- special internal wiring & connections
- higher isolation
- lower weight (aviation), adopting the module dimensions to limited space
- directly integrating the heatsink to the module (eliminating the base plate)
- implementing more powerful chips, i.e. a bigger free wheeling diode
- placing temperature- or current sensors directly at the chip
Powerex manufactures also for the US army and will apply highest military specifications when needed. The only limit for the developers is their budget: Setting up an own custom module causes high set up costs and development power. Therefore Powerex invites you to benefit from already existing designs. The following custom modules can be bought by everyone:
Custom IGBT modules
|
60
A
|
75
A
|
100
A
|
150
A
|
200
A
|
300
A
|
400
A - 600 A
|
||
| 250 V |
QIC0212003
(common emitter) |
QIE0220002
(6-pack) |
||||||
| 600 V |
QIB0607002
(H-bridge) |
QIC0610001
(common emitter) |
QIQ0630003
(low side chopper) |
|||||
| 1200 V |
QIC1208001
(common emitter) |
|||||||
| 4500 V | ||||||||
| 6500 V |
|
|||||||
more information:
custom
IGBTs short form catalogue (pdf, 1.3MB)
Custom diode modules and MOSFETs
|
60
A
|
100
A
|
250
A
|
500
A
|
|
| 500 / 600 V | QRC0610T30
/ QRD0610T30 (fast diode, common cathode) |
|||
| 1200 - 1400 V |
QID1210005
/ QID1210006
(dual Si-IGBT + SiC Freilaufdiode) QJD1210010 / QJD1210011 (dual SiC-MOSFET + SiC Freilaufdiode) |
QRC1220R30
/ QRD1220R30
(fast diode, dual or common cathode) |
QRS1450001
(single diode) |
|
| 1700 V |
|
QRS171D001
(single diode, 1200A) |
||
| 4500 V |
Powerex type and naming system for the custom modules
| Q
R S 45 06 0 02 Q I D 06 45 0 1 1 |
||||
| Q
= custom module |
||||
| G
= GTO I = IGBT J = MOSFET K = Transistor R = Rectifier / Diode T = Thyristor U = Gate driver |
||||
| B
= H-bridge C = common emitter/ cathode D = dual F = common anode G = converter / inverter H = three phase Q = low side chopper R = high side chopper S = single |
||||
| voltage
(x 100) current ( x 10) T = terminal height or version number |
||||
Evaluation- / development kits
| type | purpose | features | main element |
| BCIM | controller board | generates PWM signal for IGBTs (3 phase + brake signal). | MC3PHAC
MCU (micro controller unit) |
| BG1A | Development board | gate driver for IGBTs in single switche configuration | M57160 or VLA504 |
| BG2A | Development board | two channel gate drive board for the most recent Mitsubishi dual IGBTs of A, NF and NFH-series | VLA500, VLA502 or VLA500K |
| BG2B | Development board | gate driver board for dual-IGBTs mit kleinerer Leistung bis ca 400A, Spannungsversorgung getrennt vom Gate Treiber, so dass mit 15 oder 24V angesteuert werden kann. | VLA504
/ VLA503, with DC-DC converter VLA106-15242 or VLA106-24242 |
| BG2C | Development board | gate
driver board for fast switching IGBTs with small power up to approx. 300A.
Example for building up a driver core with Ishahaya VLA507 and VLA513
for Mitsubishi's NFH-series (for modules with more power Powerex suggests to build up the driver with Isahaya VLA502 instead) |
VLA507
/VLA513, with DC-DC converter VLA106-15242 or VLA106-24242 |
| BG2D | Development board | Gate driver for NX series, fits directly onto the gate and emitter pins of the Mitsubishi NX module series (small dual -types only, CMxxxDX-24S) | VLA503
/VLA504, with DC-DC converter VLA106-15242 or VLA106-24242 |
| BG2E | Development board | Gate driver for the IGBT modules in the big NX housing. The board is designed for direct mounting on the module (types CM600DXL-24S and CM1000DXL-24S) | VLA500-01R |
| BP2A | Development board | Gate driver board for Mitsubishi V1 series IPMs (intelligent power modules), for example PM600DV1A060 or PM800DV1B060 | VLA106-15151 or VLA106-24151 |
| BP6A | Development board | Gate driver board for the L-series IPMs in the big 6 pack housing starting at 450A / 600V and 200A / 1200V. BP6A will be mounted directly on top of the module (i.e. PM600CLA060 or PM300CLA120) | 6
x VLA106-15151 or VLA106-24151 |
| BP7A | Development board | Gate
driver board for L- and L1-series IPMs starting at 50A / 600V and 25A
/ 1200V. To be mounted directly on top of the module (types 6-pack and 7-pack, i.e. PM50RLA120) Please Note: BP7B is a development of Powerex, not to be confused with the gate driver board promoted by Mitsubishi named EVBL1/S1. |
6
x VLA106-15151 or VLA106-24151 |
| BP7B | Development board | like
BP7A, but with Isahaya's opto coupler bank VLA606-01R |
VLA606-01R
and VLA106-24151 / VLA106-24154 (or VLA106-15151) |
In the United STates
Powerex offers the boards shown above directly in sets with the corresponding
drivers and DC/DC converter ICs shown in the right column. To Europe Powerex
exports only the naked printed circuit boards (PCBs). The desired drivers
and converters of Isahaya have to be ordered separately. And your board has
to be populated also with the passive elements of the parts list by your own.
If you do not want to solder yourself, you might be interested
in the ready-to-use Isahaya product development boards. Those gate driver
solutions you will find in our semimart.net
webshop
For your qute please send an email with your price request. Normally
we will offer in Euro, but of course we can also calculate the prices
in USD ($ / US-Dollar).
Ineltron is contract
distributor of Mitsubishi (power semiconductors), Powerex, Powersem, InPower,
eldre (now Mersen)
and Isahaya
Electronics.. Heat sinks, assembly components and capacitors complete our product range for the power electronic sector.
INELTRON GmbH, Hugenottenstr.
30, 61381 Friedrichsdorf, Germany
phone: +
49 6172 59 88 09 fax: +49 6172 75933 E-Mail: info@ineltron.de
